You might all be aware of routers and its uses. A router is one of the most used networking devices worldwide. Every router has a default IP address like 192.168.1.1 or 192.168.254.1, etc. Now if one wants to set up the router you need to log in to the router. For this, you need to have a username and password. 192.168.1.1 is one such IP address which routers like Linksys and other network brands use. It acts as an access point or gateway.
In this article, find a guide on how to 192.168.1.1 login to the router, or to reset 192.168.1.1 admin password if forgotten.
Let’s get started with the article.
What is 192.168.1.1 Login Page?
IP address 192.168.1.1 is a gateway that Linksys and other network brands use. To set up router admin access in this address, you need to allow the network administrators to configure their routers and networks.
On the other side, you can also manage Security Options, Network Management, IP QoS, DNS, proxy, LAN, WAN, WLAN settings, DSL, ADSL, MAC, WPS block and many others. Not all the routers have the same IP address as the login gateway. www. 192.168.1.1 is a universal gateway for many wireless routers come with the alternative configuration page URLs.
Let us dig deep into the 192.168.1.1 gateway, universal in most of the routers.
Default Settings
When you connect to the Wireless network on the PC, entering the http://192.168.1.1 in your browser will open up the Router configuration page. Now by default, the login ID and password for your router is the “Administrator” or “Admin.”
One can get the username and password printed on the back side of the router.
Not only ID and password is given rather it gives you access a plethora of features for the 192.168.11 login.
How to Login 192.168.1.1 Router
For the users who are accessing the router for the first time, it is important to know all its steps and process. Once you get access to your router admin using 192.168.l.l IP address you can then change the settings and configurations that your router provides.
Step 1- Firstly open your web browser. Then connect to the internet on your Laptop, PC or even a Smartphone.
Step 2- Once connected to the Wi-Fi or Ethernet, open any web browser. Generally, users prefer Chrome Browser.
Step 3- Now, in the URL of the browser, type http://192.168.1.1. Press Enter to open the Router Login page.
Step 4- On the login page then type the username and Password mentioned below the Router device.
The most common combinations of username and password you can try are-
- Username – Admin, Password – Admin
- Username – Administrator, Password – Administrator
- Username – Guest, Password- Guest
Step 5- Now simply enter the Username and Password. Then login to the Router Configuration page.
Once it is done you can then start with the configuration of your router.
Also Read: How to Login 192.168.0.1 Router
How to find your Router’s IP Address?
As discussed above not all the routers have the same IP address. Hence with a different IP address, there is a login domain as well. In case if 192.168.1.1 login won’t work on all of the routers then one can find them using various methods to see the login IP.
Also if you are having other issues while accessing your router at 192.168.1.1 then you can try for other address as 192.168.0.1, 10.0.0.1 or 192.168.2.1.
192.168.1.1 Login Username Password List
Here’s a good list of 192.168.I.I admin page username password combinations of some of the biggest router brands.
Router Company |
Admin Login IP |
Username |
Password |
|---|---|---|---|
| Linksys | http://192.168.1.1 | admin | admin |
| Belkin | http://192.168.2.1 | admin | admin |
| BenQ | http://192.168.1.1 | admin | admin |
| D-Link | http://192.168.0.1 | admin | admin |
| Digicom | http://192.168.1.254 | admin | michelangelo |
| Digicom | http://192.168.1.254 | user | password |
| Digicom | http://192.168.1.254 | admin | password |
| 3Com | http://192.168.1.1 | admin | admin |
So these were some common routers having the same IP address as its default login link.
Settings to Configure using 192.168.1.1 Router Address
Now let us look at what all things you can do once the configuration page gets loaded.
Turn Wi-Fi ON/OFF
If you are using the Wi-Fi router for the browsing of the internet on your PC, then you should turn off the Wi-Fi feature on the router. This will save the little electricity. You can turn OFF or Turn ON by accessing the 168.192.1.1 page.
Configure Network Settings
You can change the general settings of your Router along with DNS settings or the Gateway IP of the ISP. You can even make your internet run faster by following the tips from your Internet Service Provider on the configuration page.
Restore Dead Internet
It happens sometimes that your internet suddenly disconnects. Then you have to wait until the ISP technician visits your home and fix it. Well, the router related issue if there can be fixed by yourself. Just access 192.168.l.l and you are ready to fix the issue.
Security Settings
It is essential to maintain the security of your router so that no one can get access to your internet and browsing history. All routers have the security settings that you can adjust yourself making your router secure from nasty hackers.
How to Recover 192.168.1.1 router Password
The default names are simple to guess, especially for common brands of routers. Once you reboot the router, a secure sign against the network name will be present. In this case, one needs to know the router name of the Wi-Fi router password desired to retrieve. When you have typed the web address, press the enter button, and find the login window. Once you locate the correct address, log in using the router’s administrative password. You can use the Command Prompt also to get the correct IP. Also, click on “Connect right to the Internet” if you are not utilizing a proxy server. The Netgear WNDR3700 model router provides you with a Web-based console program to execute a reboot of the router.
Now the only way to recover Router Username and password is to reset it. This can be done using the following steps.
Step 1- Look for the reset button on your Router. You will get it on the side of the router.
Step 2- Press and Hold the button for 10 seconds. Then release it when all LED blink.
Step 3- Wait for some time. Now connect it with PC.
Step 4- Open Browser and type 192.168.1.1 in the URL bar. Hit Enter.
Step 5- Here your username and password will be admin.
Step 6- You will be prompted to modify the password after login the first time.
Once you are done with this job successfully you can then try to log in again.
There are several reasons one wishes to reset www.192.168.1.1 login router password. One common reason is forgetting the router password. Under WPA2 encryption, the password needs to be case-sensitive and does not contain spaces. Hence it becomes difficult to retain the password.
Wrapping Up!
So this was all about the 192.168.1.1 admin login IP address. It is the default IP address of the Router configuration page. One usually needs to access it in case you wish to configure the router, change security settings, and turn ON or OFF the Wi-Fi router or other related settings.
I hope this article is of use to you and for further query feel free to comment.
