All of us are aware of the term IP address, but very few of us know what it actually means? And how it works? All devices that are connected to the Internet has an Internet Protocol Address or what we call it as an IP address. The default IP address of most of the broadband routers installed at home is 126.96.36.199. Various Netgear and D-Link routers have the 192.168.0.1 as their admin IP address, which is a private IPv4 router gateway. If you are not aware of IP address and how it works, then this article is surely going to help you.
Today we are about to share some information about the default IP address, username and password of routers having 192.168.0.1 admin login link.
What is 192.168.0.1?
The Internet Assigned Numbers Authority defined 192.168.0.1 as the private address. It is one of the predetermined ranges that is reserved for private use. The IP address is used basically on an individual machine or on a local network for specific tasks. It is commonly used as the default IP address by Netgear and D-Link router. Apart from this, 192.168.2.1 and 192.168.1.1 is also considered as the default IP addresses.
It is also searched as:
With the help of these IP addresses, a network administrator or an end user can connect to the network router. And also configure the security settings, Internet connection and perform the network administrator functions.
Features of 192.168.0.1 Default IP Address
The 192.168.0.1 is the default IP address but still, there are some features to look out for.
- An array of users can use the same IP address, but they should not belong to the same network. And so one of the major advantages is, different networks can use it.
- You do not need separate DHCP servers if you are using this default IP address. And so without the help of any additional stitches, you can easily complete all the tasks.
- With this default IP address, the information flow becomes smooth and easier. This default gateway acts as the highway to send the data or process the traffic to various destinations.
How to Login 192.168.0.1 Admin
The process to access the management console or for 192.168.0.1 login, you just need to follow the steps given below.
Step 1: Firstly, open your web browser. Then in the address bar type http://192.168.0.1/
Step 2: You will be redirected to the admin page of the router. In the login panel, enter your username and password.
Step 3: You can check your default username and password from the standard list. Or you can also reset the same.
Now that you have access to the router, you can make changes both at the basic and advanced level. You can change settings such as routing, DNS, and IP allocation, etc.
How to find your Router’s IP Address?
The local IP address is the default private IP address which is preset for every home routers. One can find it in the manufacturer’s documentation. Also, different models from the same manufacturer have the same IP address. If you are not aware of the number, then you can check it from the router’s settings.
If you have a Linksys router, then you will find the IP address in the Setup> Basic Setup window. And in case of Netgear router, the Gateway IP address is pre-set in the Maintenance> Router setup page.
The Local Default IP address of some of the popular brands of routers and modems are-
- Linksys routers use 192.168.1.1 as their default address.
- Cisco routers often use 192.168.10.2, 192.168.1.1 or 192.168.1.254 as their default address.
- NETGEAR and D-Link routers are commonly set to 192.168.0.1
- Some Belkin and SMC routers are set to 192.168.2.1
There are yet other ways by which you can find the IP address of your router in Linux, Mac and Windows OS. Also if you wish you can change the IP address of your router, either during the router setup or also later. Check out how you can do this.
In case you are not able to do 192.168.0.1 login, then it is possible that it is not the gateway of your computer. If you enter http://192.168.0.1 in your browser, and it doesn’t work, then follow the steps to find your right gateway. Open your command prompt, by pressing the Windows icon key R> enter cmd in the Run box.
In the command window, enter “ipconfig” and press Enter. Your IPv4 address, DNS server, and Gateway will be visible. And so this is how you can check your local IP address and complete 192.168.0.1 login successfully.
How to Change Your Router’s IP Address?
The IP address is not just numbers but involves a lot of maths. But to keep the explanation short, IP addresses are set by the manufacturer of the factory. However one can change it with the help of the administrative console of the network router at any time. But why to?
There is a possibility that some other device on your network also has the same IP address. In such a situation, an address conflict can come up, and so you can change your IP address to prevent any duplicates. The IP address of any device can be changed to a comparable IPv4 address so that only one device works with 192.168.0.1 IP address and address conflicts are avoided.
How to Change or Reset 192.168.0.1 Password
There are 50 percent chances that you can forget the password or username of your router. But do not worry as just like other sites, you can reset the username or password of the D-Link or Netgear router.
The default username and password of wireless and ADSL modems are usually pre-defined. Like 192.168.1.1 admin is the IP address and default username and password of the Linksys and Asus router. Some other common default IP address and username and password login are-
|Router Brand||Default IP Address||Username||Password|
|Netgear Default Login||http://192.168.0.1/||Admin||Password|
|Arris Default Login||http://192.168.0.1/||Admin||Password|
|Linksys Default Login||http://192.168.1.1/||Admin||Admin|
|Belkin Default Login||http://192.168.2.1/||Admin||Admin|
If you still can’t find it, or the default credentials are not working then you can reset it. The modern modems and routers have a hidden button with which you can reset the properties to the default factory settings. Press the button for 10 to 15 seconds either with your finger or a toothpick. This will reset your device to the factory settings. And you can now log in to the router settings using the default username and password.
192.168.0.1 Dlink or Netgear login access should be restricted for use by other people, and so one should always change their default credentials.
So, guys, this was all about the 192.168.0.1 login and how you can change your default username and password. If you have any queries regarding your router’s IP address or username and password, do let us know in the comment section.